Description

The Meditech Europe IonExtra water ionizer has a large multi-layer filter with tourmaline and calcium instead of simple activated carbon. It can be connected directly to the cold water pipe and has a water supply knob, ideal for connecting to the tap: the water ionizer starts when water enters and stops when you turn off the water supply at the tap.
The Meditech Europe IonExtra does not add salt for the production of anolyte and catholyte water, in this case the ECA Plus Water Tractor can be used. To maximize hydrogen capacity on the water and on the road, you can optionally purchase a portable H2Future. To maximize the water’s hydrogen capacity and travel, you can optionally purchase a portable H2 water generator. Please note the selection window above.

The platinum-sprayed titanium electrodes (plus-minus poles) fulfill the fundamental task of separating purified water into alkaline and acidic water using a patented process. There are large differences in the base quality and active water quality of the different water ionizers worldwide, which are achieved by the thickness and type (galvanized or sprayed) of the platinum-titanium coating and the number of electrodes in total. Each of the 9 electrodes is applied using three patented spraying techniques that perfectly apply the platinum layers and leave no openings. In contrast to 5-electrode water ionizers, this excellent 9-electrode ionizer is also suitable for very hard tap water above °dH 27. Even with hard water, values of up to pH 10.5 and higher can be reached safely and sustainably. Another advantage of platinum-nitanium plating is that it has high electrical conductivity and is a harmless material for the human body. In addition, the heart of the Meditech Europe IonExtra (formerly Moses 9 or Moses 7) water ionizer is characterized by extremely low power consumption and good electrolytic performance.

• Very high pH and especially redox potential (ORP) values can be achieved.
• Installation on the water tap with the switching valve or fixed connection with the 3/8″ T-piece (DVGW-tested) or with the 3/4″ screw cap, all connection parts are included in the scope of delivery.
• 9 platinum-coated titanium electrodes, 1204 cm².
• SMPS power supply (max. 250W)
• Hydrogen yield at °dH16-18, highest degree of electrolysis & 0.5 L/min base water: ∼1000 ppb molecularly dissolved hydrogen/liter
• Limescale protection through polarity reversal of the electrodes & automatic flow reversal – the most effective protection against limescale deposits, even with very calcareous water over °dH20
• 370x280x280x150mm
• 7 year full guarantee